LOT-0002

Lot 1: 5.56mm x 45 NATO Ball

5.56mm x 45 NATO Ball unlinked ammunition.

SuppliesFramework

Location

Belgium

Category

Ammunition for firearms and warfare

Deadline

Expired Jun 10, 2026

LOT-0003

Lot 2: 5.56mm x 45 Tracer

5.56mm x 45 Tracer unlinked ammunition.

SuppliesFramework

Location

Belgium

Category

Ammunition for firearms and warfare

Deadline

Expired Jun 10, 2026

LOT-0004

Lot 3: 5.56mm x 45 Armour Piercing

5.56mm x 45 Armour Piercing unlinked ammunition.

SuppliesFramework

Location

Belgium

Category

Ammunition for firearms and warfare

Deadline

Expired Jun 10, 2026

LOT-0005

Supply of NATO calibre Small Arms ammunition and Auto Canon ammunition, structured in 19 lots covering various NATO calibres (5.56mm×45; 7.62mm×51; 9mm×19; 12.7mm×99; and 30mm x 173) and types (inter alia Ball; Tracer; Armour Piercing; High Explosive Incendiary etc.). Each lot covers a specific calibre and type in either linked or unlinked formats, as specified hereunder. Additional Information: This procurement procedure is conducted in two stages. In the first stage, economic operators interested in the framework contract(s) are invited to submit a request to participate, drafted in one of the official languages of the European Union. In the second stage, only candidates selected following the evaluation of the requests to participate will be invited to submit a tender. Any tender submitted by a natural or legal person that has not been invited to tender will be rejected. Economic operators that possess the requisite financial capacity to perform the framework contract(s) in accordance with the applicable EU and/or national legislation, and as further specified under the Tendering Terms of the relevant Lot, may request to be invited to tender by submitting a request to participate in accordance with the following cumulative requirements: The request to participate template must be requested by email from EDA Procurement at JP@eda.europa.eu. The request shall clearly state in the subject the Internal identifier: CPoA B PRJ.CAP.1269 2026. The duly completed and signed request to participate must be submitted by email to EDA Procurement at JP@eda.europa.eu no later than 01 June 2026 at 15:00 (Brussels time). The request must be accompanied by a duly completed and signed Legal Entity Form (available at: https://commission.europa.eu/publications/business-partners-legal-entities-and-bank-accounts_en). The submission of a request to participate does not constitute a guarantee of selection. All criteria, requirements, and conditions applicable to this procurement procedure will be set out in the procurement documents made available to invited candidates as part of the invitation to tender. The Contracting Authority reserves the right to cancel the procedure at any time prior to the signature of the contract, without any obligation to compensate the candidates or tenderers.

SuppliesFramework

Location

Belgium

Category

Ammunition for firearms and warfare

LOT-0006

Supply of NATO calibre Small Arms ammunition and Auto Canon ammunition, structured in 19 lots covering various NATO calibres (5.56mm×45; 7.62mm×51; 9mm×19; 12.7mm×99; and 30mm x 173) and types (inter alia Ball; Tracer; Armour Piercing; High Explosive Incendiary etc.). Each lot covers a specific calibre and type in either linked or unlinked formats, as specified hereunder. Additional Information: This procurement procedure is conducted in two stages. In the first stage, economic operators interested in the framework contract(s) are invited to submit a request to participate, drafted in one of the official languages of the European Union. In the second stage, only candidates selected following the evaluation of the requests to participate will be invited to submit a tender. Any tender submitted by a natural or legal person that has not been invited to tender will be rejected. Economic operators that possess the requisite financial capacity to perform the framework contract(s) in accordance with the applicable EU and/or national legislation, and as further specified under the Tendering Terms of the relevant Lot, may request to be invited to tender by submitting a request to participate in accordance with the following cumulative requirements: The request to participate template must be requested by email from EDA Procurement at JP@eda.europa.eu. The request shall clearly state in the subject the Internal identifier: CPoA B PRJ.CAP.1269 2026. The duly completed and signed request to participate must be submitted by email to EDA Procurement at JP@eda.europa.eu no later than 01 June 2026 at 15:00 (Brussels time). The request must be accompanied by a duly completed and signed Legal Entity Form (available at: https://commission.europa.eu/publications/business-partners-legal-entities-and-bank-accounts_en). The submission of a request to participate does not constitute a guarantee of selection. All criteria, requirements, and conditions applicable to this procurement procedure will be set out in the procurement documents made available to invited candidates as part of the invitation to tender. The Contracting Authority reserves the right to cancel the procedure at any time prior to the signature of the contract, without any obligation to compensate the candidates or tenderers.

SuppliesFramework

Location

Belgium

Category

Ammunition for firearms and warfare

LOT-0007

Supply of NATO calibre Small Arms ammunition and Auto Canon ammunition, structured in 19 lots covering various NATO calibres (5.56mm×45; 7.62mm×51; 9mm×19; 12.7mm×99; and 30mm x 173) and types (inter alia Ball; Tracer; Armour Piercing; High Explosive Incendiary etc.). Each lot covers a specific calibre and type in either linked or unlinked formats, as specified hereunder. Additional Information: This procurement procedure is conducted in two stages. In the first stage, economic operators interested in the framework contract(s) are invited to submit a request to participate, drafted in one of the official languages of the European Union. In the second stage, only candidates selected following the evaluation of the requests to participate will be invited to submit a tender. Any tender submitted by a natural or legal person that has not been invited to tender will be rejected. Economic operators that possess the requisite financial capacity to perform the framework contract(s) in accordance with the applicable EU and/or national legislation, and as further specified under the Tendering Terms of the relevant Lot, may request to be invited to tender by submitting a request to participate in accordance with the following cumulative requirements: The request to participate template must be requested by email from EDA Procurement at JP@eda.europa.eu. The request shall clearly state in the subject the Internal identifier: CPoA B PRJ.CAP.1269 2026. The duly completed and signed request to participate must be submitted by email to EDA Procurement at JP@eda.europa.eu no later than 01 June 2026 at 15:00 (Brussels time). The request must be accompanied by a duly completed and signed Legal Entity Form (available at: https://commission.europa.eu/publications/business-partners-legal-entities-and-bank-accounts_en). The submission of a request to participate does not constitute a guarantee of selection. All criteria, requirements, and conditions applicable to this procurement procedure will be set out in the procurement documents made available to invited candidates as part of the invitation to tender. The Contracting Authority reserves the right to cancel the procedure at any time prior to the signature of the contract, without any obligation to compensate the candidates or tenderers.

SuppliesFramework

Location

Belgium

Category

Ammunition for firearms and warfare

LOT-0008

Supply of NATO calibre Small Arms ammunition and Auto Canon ammunition, structured in 19 lots covering various NATO calibres (5.56mm×45; 7.62mm×51; 9mm×19; 12.7mm×99; and 30mm x 173) and types (inter alia Ball; Tracer; Armour Piercing; High Explosive Incendiary etc.). Each lot covers a specific calibre and type in either linked or unlinked formats, as specified hereunder. Additional Information: This procurement procedure is conducted in two stages. In the first stage, economic operators interested in the framework contract(s) are invited to submit a request to participate, drafted in one of the official languages of the European Union. In the second stage, only candidates selected following the evaluation of the requests to participate will be invited to submit a tender. Any tender submitted by a natural or legal person that has not been invited to tender will be rejected. Economic operators that possess the requisite financial capacity to perform the framework contract(s) in accordance with the applicable EU and/or national legislation, and as further specified under the Tendering Terms of the relevant Lot, may request to be invited to tender by submitting a request to participate in accordance with the following cumulative requirements: The request to participate template must be requested by email from EDA Procurement at JP@eda.europa.eu. The request shall clearly state in the subject the Internal identifier: CPoA B PRJ.CAP.1269 2026. The duly completed and signed request to participate must be submitted by email to EDA Procurement at JP@eda.europa.eu no later than 01 June 2026 at 15:00 (Brussels time). The request must be accompanied by a duly completed and signed Legal Entity Form (available at: https://commission.europa.eu/publications/business-partners-legal-entities-and-bank-accounts_en). The submission of a request to participate does not constitute a guarantee of selection. All criteria, requirements, and conditions applicable to this procurement procedure will be set out in the procurement documents made available to invited candidates as part of the invitation to tender. The Contracting Authority reserves the right to cancel the procedure at any time prior to the signature of the contract, without any obligation to compensate the candidates or tenderers.

SuppliesFramework

Location

Belgium

Category

Ammunition for firearms and warfare

LOT-0009

Supply of NATO calibre Small Arms ammunition and Auto Canon ammunition, structured in 19 lots covering various NATO calibres (5.56mm×45; 7.62mm×51; 9mm×19; 12.7mm×99; and 30mm x 173) and types (inter alia Ball; Tracer; Armour Piercing; High Explosive Incendiary etc.). Each lot covers a specific calibre and type in either linked or unlinked formats, as specified hereunder. Additional Information: This procurement procedure is conducted in two stages. In the first stage, economic operators interested in the framework contract(s) are invited to submit a request to participate, drafted in one of the official languages of the European Union. In the second stage, only candidates selected following the evaluation of the requests to participate will be invited to submit a tender. Any tender submitted by a natural or legal person that has not been invited to tender will be rejected. Economic operators that possess the requisite financial capacity to perform the framework contract(s) in accordance with the applicable EU and/or national legislation, and as further specified under the Tendering Terms of the relevant Lot, may request to be invited to tender by submitting a request to participate in accordance with the following cumulative requirements: The request to participate template must be requested by email from EDA Procurement at JP@eda.europa.eu. The request shall clearly state in the subject the Internal identifier: CPoA B PRJ.CAP.1269 2026. The duly completed and signed request to participate must be submitted by email to EDA Procurement at JP@eda.europa.eu no later than 01 June 2026 at 15:00 (Brussels time). The request must be accompanied by a duly completed and signed Legal Entity Form (available at: https://commission.europa.eu/publications/business-partners-legal-entities-and-bank-accounts_en). The submission of a request to participate does not constitute a guarantee of selection. All criteria, requirements, and conditions applicable to this procurement procedure will be set out in the procurement documents made available to invited candidates as part of the invitation to tender. The Contracting Authority reserves the right to cancel the procedure at any time prior to the signature of the contract, without any obligation to compensate the candidates or tenderers.

SuppliesFramework

Location

Belgium

Category

Ammunition for firearms and warfare

LOT-0010

Supply of NATO calibre Small Arms ammunition and Auto Canon ammunition, structured in 19 lots covering various NATO calibres (5.56mm×45; 7.62mm×51; 9mm×19; 12.7mm×99; and 30mm x 173) and types (inter alia Ball; Tracer; Armour Piercing; High Explosive Incendiary etc.). Each lot covers a specific calibre and type in either linked or unlinked formats, as specified hereunder. Additional Information: This procurement procedure is conducted in two stages. In the first stage, economic operators interested in the framework contract(s) are invited to submit a request to participate, drafted in one of the official languages of the European Union. In the second stage, only candidates selected following the evaluation of the requests to participate will be invited to submit a tender. Any tender submitted by a natural or legal person that has not been invited to tender will be rejected. Economic operators that possess the requisite financial capacity to perform the framework contract(s) in accordance with the applicable EU and/or national legislation, and as further specified under the Tendering Terms of the relevant Lot, may request to be invited to tender by submitting a request to participate in accordance with the following cumulative requirements: The request to participate template must be requested by email from EDA Procurement at JP@eda.europa.eu. The request shall clearly state in the subject the Internal identifier: CPoA B PRJ.CAP.1269 2026. The duly completed and signed request to participate must be submitted by email to EDA Procurement at JP@eda.europa.eu no later than 01 June 2026 at 15:00 (Brussels time). The request must be accompanied by a duly completed and signed Legal Entity Form (available at: https://commission.europa.eu/publications/business-partners-legal-entities-and-bank-accounts_en). The submission of a request to participate does not constitute a guarantee of selection. All criteria, requirements, and conditions applicable to this procurement procedure will be set out in the procurement documents made available to invited candidates as part of the invitation to tender. The Contracting Authority reserves the right to cancel the procedure at any time prior to the signature of the contract, without any obligation to compensate the candidates or tenderers.

SuppliesFramework

Location

Belgium

Category

Ammunition for firearms and warfare

LOT-0011

Supply of NATO calibre Small Arms ammunition and Auto Canon ammunition, structured in 19 lots covering various NATO calibres (5.56mm×45; 7.62mm×51; 9mm×19; 12.7mm×99; and 30mm x 173) and types (inter alia Ball; Tracer; Armour Piercing; High Explosive Incendiary etc.). Each lot covers a specific calibre and type in either linked or unlinked formats, as specified hereunder. Additional Information: This procurement procedure is conducted in two stages. In the first stage, economic operators interested in the framework contract(s) are invited to submit a request to participate, drafted in one of the official languages of the European Union. In the second stage, only candidates selected following the evaluation of the requests to participate will be invited to submit a tender. Any tender submitted by a natural or legal person that has not been invited to tender will be rejected. Economic operators that possess the requisite financial capacity to perform the framework contract(s) in accordance with the applicable EU and/or national legislation, and as further specified under the Tendering Terms of the relevant Lot, may request to be invited to tender by submitting a request to participate in accordance with the following cumulative requirements: The request to participate template must be requested by email from EDA Procurement at JP@eda.europa.eu. The request shall clearly state in the subject the Internal identifier: CPoA B PRJ.CAP.1269 2026. The duly completed and signed request to participate must be submitted by email to EDA Procurement at JP@eda.europa.eu no later than 01 June 2026 at 15:00 (Brussels time). The request must be accompanied by a duly completed and signed Legal Entity Form (available at: https://commission.europa.eu/publications/business-partners-legal-entities-and-bank-accounts_en). The submission of a request to participate does not constitute a guarantee of selection. All criteria, requirements, and conditions applicable to this procurement procedure will be set out in the procurement documents made available to invited candidates as part of the invitation to tender. The Contracting Authority reserves the right to cancel the procedure at any time prior to the signature of the contract, without any obligation to compensate the candidates or tenderers.

SuppliesFramework

Location

Belgium

Category

Ammunition for firearms and warfare

LOT-0012

Supply of NATO calibre Small Arms ammunition and Auto Canon ammunition, structured in 19 lots covering various NATO calibres (5.56mm×45; 7.62mm×51; 9mm×19; 12.7mm×99; and 30mm x 173) and types (inter alia Ball; Tracer; Armour Piercing; High Explosive Incendiary etc.). Each lot covers a specific calibre and type in either linked or unlinked formats, as specified hereunder. Additional Information: This procurement procedure is conducted in two stages. In the first stage, economic operators interested in the framework contract(s) are invited to submit a request to participate, drafted in one of the official languages of the European Union. In the second stage, only candidates selected following the evaluation of the requests to participate will be invited to submit a tender. Any tender submitted by a natural or legal person that has not been invited to tender will be rejected. Economic operators that possess the requisite financial capacity to perform the framework contract(s) in accordance with the applicable EU and/or national legislation, and as further specified under the Tendering Terms of the relevant Lot, may request to be invited to tender by submitting a request to participate in accordance with the following cumulative requirements: The request to participate template must be requested by email from EDA Procurement at JP@eda.europa.eu. The request shall clearly state in the subject the Internal identifier: CPoA B PRJ.CAP.1269 2026. The duly completed and signed request to participate must be submitted by email to EDA Procurement at JP@eda.europa.eu no later than 01 June 2026 at 15:00 (Brussels time). The request must be accompanied by a duly completed and signed Legal Entity Form (available at: https://commission.europa.eu/publications/business-partners-legal-entities-and-bank-accounts_en). The submission of a request to participate does not constitute a guarantee of selection. All criteria, requirements, and conditions applicable to this procurement procedure will be set out in the procurement documents made available to invited candidates as part of the invitation to tender. The Contracting Authority reserves the right to cancel the procedure at any time prior to the signature of the contract, without any obligation to compensate the candidates or tenderers.

SuppliesFramework

Location

Belgium

Category

Ammunition for firearms and warfare

LOT-0013

Supply of NATO calibre Small Arms ammunition and Auto Canon ammunition, structured in 19 lots covering various NATO calibres (5.56mm×45; 7.62mm×51; 9mm×19; 12.7mm×99; and 30mm x 173) and types (inter alia Ball; Tracer; Armour Piercing; High Explosive Incendiary etc.). Each lot covers a specific calibre and type in either linked or unlinked formats, as specified hereunder. Additional Information: This procurement procedure is conducted in two stages. In the first stage, economic operators interested in the framework contract(s) are invited to submit a request to participate, drafted in one of the official languages of the European Union. In the second stage, only candidates selected following the evaluation of the requests to participate will be invited to submit a tender. Any tender submitted by a natural or legal person that has not been invited to tender will be rejected. Economic operators that possess the requisite financial capacity to perform the framework contract(s) in accordance with the applicable EU and/or national legislation, and as further specified under the Tendering Terms of the relevant Lot, may request to be invited to tender by submitting a request to participate in accordance with the following cumulative requirements: The request to participate template must be requested by email from EDA Procurement at JP@eda.europa.eu. The request shall clearly state in the subject the Internal identifier: CPoA B PRJ.CAP.1269 2026. The duly completed and signed request to participate must be submitted by email to EDA Procurement at JP@eda.europa.eu no later than 01 June 2026 at 15:00 (Brussels time). The request must be accompanied by a duly completed and signed Legal Entity Form (available at: https://commission.europa.eu/publications/business-partners-legal-entities-and-bank-accounts_en). The submission of a request to participate does not constitute a guarantee of selection. All criteria, requirements, and conditions applicable to this procurement procedure will be set out in the procurement documents made available to invited candidates as part of the invitation to tender. The Contracting Authority reserves the right to cancel the procedure at any time prior to the signature of the contract, without any obligation to compensate the candidates or tenderers.

SuppliesFramework

Location

Belgium

Category

Ammunition for firearms and warfare

LOT-0014

Supply of NATO calibre Small Arms ammunition and Auto Canon ammunition, structured in 19 lots covering various NATO calibres (5.56mm×45; 7.62mm×51; 9mm×19; 12.7mm×99; and 30mm x 173) and types (inter alia Ball; Tracer; Armour Piercing; High Explosive Incendiary etc.). Each lot covers a specific calibre and type in either linked or unlinked formats, as specified hereunder. Additional Information: This procurement procedure is conducted in two stages. In the first stage, economic operators interested in the framework contract(s) are invited to submit a request to participate, drafted in one of the official languages of the European Union. In the second stage, only candidates selected following the evaluation of the requests to participate will be invited to submit a tender. Any tender submitted by a natural or legal person that has not been invited to tender will be rejected. Economic operators that possess the requisite financial capacity to perform the framework contract(s) in accordance with the applicable EU and/or national legislation, and as further specified under the Tendering Terms of the relevant Lot, may request to be invited to tender by submitting a request to participate in accordance with the following cumulative requirements: The request to participate template must be requested by email from EDA Procurement at JP@eda.europa.eu. The request shall clearly state in the subject the Internal identifier: CPoA B PRJ.CAP.1269 2026. The duly completed and signed request to participate must be submitted by email to EDA Procurement at JP@eda.europa.eu no later than 01 June 2026 at 15:00 (Brussels time). The request must be accompanied by a duly completed and signed Legal Entity Form (available at: https://commission.europa.eu/publications/business-partners-legal-entities-and-bank-accounts_en). The submission of a request to participate does not constitute a guarantee of selection. All criteria, requirements, and conditions applicable to this procurement procedure will be set out in the procurement documents made available to invited candidates as part of the invitation to tender. The Contracting Authority reserves the right to cancel the procedure at any time prior to the signature of the contract, without any obligation to compensate the candidates or tenderers.

SuppliesFramework

Location

Belgium

Category

Ammunition for firearms and warfare

LOT-0016

Supply of NATO calibre Small Arms ammunition and Auto Canon ammunition, structured in 19 lots covering various NATO calibres (5.56mm×45; 7.62mm×51; 9mm×19; 12.7mm×99; and 30mm x 173) and types (inter alia Ball; Tracer; Armour Piercing; High Explosive Incendiary etc.). Each lot covers a specific calibre and type in either linked or unlinked formats, as specified hereunder. Additional Information: This procurement procedure is conducted in two stages. In the first stage, economic operators interested in the framework contract(s) are invited to submit a request to participate, drafted in one of the official languages of the European Union. In the second stage, only candidates selected following the evaluation of the requests to participate will be invited to submit a tender. Any tender submitted by a natural or legal person that has not been invited to tender will be rejected. Economic operators that possess the requisite financial capacity to perform the framework contract(s) in accordance with the applicable EU and/or national legislation, and as further specified under the Tendering Terms of the relevant Lot, may request to be invited to tender by submitting a request to participate in accordance with the following cumulative requirements: The request to participate template must be requested by email from EDA Procurement at JP@eda.europa.eu. The request shall clearly state in the subject the Internal identifier: CPoA B PRJ.CAP.1269 2026. The duly completed and signed request to participate must be submitted by email to EDA Procurement at JP@eda.europa.eu no later than 01 June 2026 at 15:00 (Brussels time). The request must be accompanied by a duly completed and signed Legal Entity Form (available at: https://commission.europa.eu/publications/business-partners-legal-entities-and-bank-accounts_en). The submission of a request to participate does not constitute a guarantee of selection. All criteria, requirements, and conditions applicable to this procurement procedure will be set out in the procurement documents made available to invited candidates as part of the invitation to tender. The Contracting Authority reserves the right to cancel the procedure at any time prior to the signature of the contract, without any obligation to compensate the candidates or tenderers.

SuppliesFramework

Location

Belgium

Category

Ammunition for firearms and warfare

LOT-0017

Supply of NATO calibre Small Arms ammunition and Auto Canon ammunition, structured in 19 lots covering various NATO calibres (5.56mm×45; 7.62mm×51; 9mm×19; 12.7mm×99; and 30mm x 173) and types (inter alia Ball; Tracer; Armour Piercing; High Explosive Incendiary etc.). Each lot covers a specific calibre and type in either linked or unlinked formats, as specified hereunder. Additional Information: This procurement procedure is conducted in two stages. In the first stage, economic operators interested in the framework contract(s) are invited to submit a request to participate, drafted in one of the official languages of the European Union. In the second stage, only candidates selected following the evaluation of the requests to participate will be invited to submit a tender. Any tender submitted by a natural or legal person that has not been invited to tender will be rejected. Economic operators that possess the requisite financial capacity to perform the framework contract(s) in accordance with the applicable EU and/or national legislation, and as further specified under the Tendering Terms of the relevant Lot, may request to be invited to tender by submitting a request to participate in accordance with the following cumulative requirements: The request to participate template must be requested by email from EDA Procurement at JP@eda.europa.eu. The request shall clearly state in the subject the Internal identifier: CPoA B PRJ.CAP.1269 2026. The duly completed and signed request to participate must be submitted by email to EDA Procurement at JP@eda.europa.eu no later than 01 June 2026 at 15:00 (Brussels time). The request must be accompanied by a duly completed and signed Legal Entity Form (available at: https://commission.europa.eu/publications/business-partners-legal-entities-and-bank-accounts_en). The submission of a request to participate does not constitute a guarantee of selection. All criteria, requirements, and conditions applicable to this procurement procedure will be set out in the procurement documents made available to invited candidates as part of the invitation to tender. The Contracting Authority reserves the right to cancel the procedure at any time prior to the signature of the contract, without any obligation to compensate the candidates or tenderers.

SuppliesFramework

Location

Belgium

Category

Ammunition for firearms and warfare

LOT-0018

Supply of NATO calibre Small Arms ammunition and Auto Canon ammunition, structured in 19 lots covering various NATO calibres (5.56mm×45; 7.62mm×51; 9mm×19; 12.7mm×99; and 30mm x 173) and types (inter alia Ball; Tracer; Armour Piercing; High Explosive Incendiary etc.). Each lot covers a specific calibre and type in either linked or unlinked formats, as specified hereunder. Additional Information: This procurement procedure is conducted in two stages. In the first stage, economic operators interested in the framework contract(s) are invited to submit a request to participate, drafted in one of the official languages of the European Union. In the second stage, only candidates selected following the evaluation of the requests to participate will be invited to submit a tender. Any tender submitted by a natural or legal person that has not been invited to tender will be rejected. Economic operators that possess the requisite financial capacity to perform the framework contract(s) in accordance with the applicable EU and/or national legislation, and as further specified under the Tendering Terms of the relevant Lot, may request to be invited to tender by submitting a request to participate in accordance with the following cumulative requirements: The request to participate template must be requested by email from EDA Procurement at JP@eda.europa.eu. The request shall clearly state in the subject the Internal identifier: CPoA B PRJ.CAP.1269 2026. The duly completed and signed request to participate must be submitted by email to EDA Procurement at JP@eda.europa.eu no later than 01 June 2026 at 15:00 (Brussels time). The request must be accompanied by a duly completed and signed Legal Entity Form (available at: https://commission.europa.eu/publications/business-partners-legal-entities-and-bank-accounts_en). The submission of a request to participate does not constitute a guarantee of selection. All criteria, requirements, and conditions applicable to this procurement procedure will be set out in the procurement documents made available to invited candidates as part of the invitation to tender. The Contracting Authority reserves the right to cancel the procedure at any time prior to the signature of the contract, without any obligation to compensate the candidates or tenderers.

SuppliesFramework

Location

Belgium

Category

Ammunition for firearms and warfare

LOT-0019

Supply of NATO calibre Small Arms ammunition and Auto Canon ammunition, structured in 19 lots covering various NATO calibres (5.56mm×45; 7.62mm×51; 9mm×19; 12.7mm×99; and 30mm x 173) and types (inter alia Ball; Tracer; Armour Piercing; High Explosive Incendiary etc.). Each lot covers a specific calibre and type in either linked or unlinked formats, as specified hereunder. Additional Information: This procurement procedure is conducted in two stages. In the first stage, economic operators interested in the framework contract(s) are invited to submit a request to participate, drafted in one of the official languages of the European Union. In the second stage, only candidates selected following the evaluation of the requests to participate will be invited to submit a tender. Any tender submitted by a natural or legal person that has not been invited to tender will be rejected. Economic operators that possess the requisite financial capacity to perform the framework contract(s) in accordance with the applicable EU and/or national legislation, and as further specified under the Tendering Terms of the relevant Lot, may request to be invited to tender by submitting a request to participate in accordance with the following cumulative requirements: The request to participate template must be requested by email from EDA Procurement at JP@eda.europa.eu. The request shall clearly state in the subject the Internal identifier: CPoA B PRJ.CAP.1269 2026. The duly completed and signed request to participate must be submitted by email to EDA Procurement at JP@eda.europa.eu no later than 01 June 2026 at 15:00 (Brussels time). The request must be accompanied by a duly completed and signed Legal Entity Form (available at: https://commission.europa.eu/publications/business-partners-legal-entities-and-bank-accounts_en). The submission of a request to participate does not constitute a guarantee of selection. All criteria, requirements, and conditions applicable to this procurement procedure will be set out in the procurement documents made available to invited candidates as part of the invitation to tender. The Contracting Authority reserves the right to cancel the procedure at any time prior to the signature of the contract, without any obligation to compensate the candidates or tenderers.

SuppliesFramework

Location

Belgium

Category

Ammunition for firearms and warfare

LOT-0020

Supply of NATO calibre Small Arms ammunition and Auto Canon ammunition, structured in 19 lots covering various NATO calibres (5.56mm×45; 7.62mm×51; 9mm×19; 12.7mm×99; and 30mm x 173) and types (inter alia Ball; Tracer; Armour Piercing; High Explosive Incendiary etc.). Each lot covers a specific calibre and type in either linked or unlinked formats, as specified hereunder. Additional Information: This procurement procedure is conducted in two stages. In the first stage, economic operators interested in the framework contract(s) are invited to submit a request to participate, drafted in one of the official languages of the European Union. In the second stage, only candidates selected following the evaluation of the requests to participate will be invited to submit a tender. Any tender submitted by a natural or legal person that has not been invited to tender will be rejected. Economic operators that possess the requisite financial capacity to perform the framework contract(s) in accordance with the applicable EU and/or national legislation, and as further specified under the Tendering Terms of the relevant Lot, may request to be invited to tender by submitting a request to participate in accordance with the following cumulative requirements: The request to participate template must be requested by email from EDA Procurement at JP@eda.europa.eu. The request shall clearly state in the subject the Internal identifier: CPoA B PRJ.CAP.1269 2026. The duly completed and signed request to participate must be submitted by email to EDA Procurement at JP@eda.europa.eu no later than 01 June 2026 at 15:00 (Brussels time). The request must be accompanied by a duly completed and signed Legal Entity Form (available at: https://commission.europa.eu/publications/business-partners-legal-entities-and-bank-accounts_en). The submission of a request to participate does not constitute a guarantee of selection. All criteria, requirements, and conditions applicable to this procurement procedure will be set out in the procurement documents made available to invited candidates as part of the invitation to tender. The Contracting Authority reserves the right to cancel the procedure at any time prior to the signature of the contract, without any obligation to compensate the candidates or tenderers.

SuppliesFramework

Location

Belgium

Category

Ammunition for firearms and warfare

LOT-0021

Supply of NATO calibre Small Arms ammunition and Auto Canon ammunition, structured in 19 lots covering various NATO calibres (5.56mm×45; 7.62mm×51; 9mm×19; 12.7mm×99; and 30mm x 173) and types (inter alia Ball; Tracer; Armour Piercing; High Explosive Incendiary etc.). Each lot covers a specific calibre and type in either linked or unlinked formats, as specified hereunder. Additional Information: This procurement procedure is conducted in two stages. In the first stage, economic operators interested in the framework contract(s) are invited to submit a request to participate, drafted in one of the official languages of the European Union. In the second stage, only candidates selected following the evaluation of the requests to participate will be invited to submit a tender. Any tender submitted by a natural or legal person that has not been invited to tender will be rejected. Economic operators that possess the requisite financial capacity to perform the framework contract(s) in accordance with the applicable EU and/or national legislation, and as further specified under the Tendering Terms of the relevant Lot, may request to be invited to tender by submitting a request to participate in accordance with the following cumulative requirements: The request to participate template must be requested by email from EDA Procurement at JP@eda.europa.eu. The request shall clearly state in the subject the Internal identifier: CPoA B PRJ.CAP.1269 2026. The duly completed and signed request to participate must be submitted by email to EDA Procurement at JP@eda.europa.eu no later than 01 June 2026 at 15:00 (Brussels time). The request must be accompanied by a duly completed and signed Legal Entity Form (available at: https://commission.europa.eu/publications/business-partners-legal-entities-and-bank-accounts_en). The submission of a request to participate does not constitute a guarantee of selection. All criteria, requirements, and conditions applicable to this procurement procedure will be set out in the procurement documents made available to invited candidates as part of the invitation to tender. The Contracting Authority reserves the right to cancel the procedure at any time prior to the signature of the contract, without any obligation to compensate the candidates or tenderers.

SuppliesFramework

Location

Belgium

Category

Ammunition for firearms and warfare

Supply of small arms and autocannon ammunition

Overview

Key Requirements

Buyer

Lots (19)

Lot 1: 5.56mm x 45 NATO Ball

Lot 2: 5.56mm x 45 Tracer

Lot 3: 5.56mm x 45 Armour Piercing

LOT-0005

LOT-0006

LOT-0007

LOT-0008

LOT-0009

LOT-0010

LOT-0011

LOT-0012

LOT-0013

LOT-0014

LOT-0016

LOT-0017

LOT-0018

LOT-0019

LOT-0020

LOT-0021

Procurement Details

Reference metadata

Reference IDs

Similar tenders