Belgium – Ammunition for firearms and warfare – Supply of Small Arms Ammunition and Auto Canon Ammunition Internal identifier: CPoA B PRJ.CAP.1269 2026
Original notice title
Supply of Small Arms Ammunition and Auto Canon Ammunition Internal identifier: CPoA B PRJ.CAP.1269 2026
Opportunity Score
Why this score?
Opportunity
60 / 100
Complexity
80 / 100
Risk factors
The absence of an estimated contract value prevents assessment of the financial scale of the opportunity.
Only candidates selected after the first stage will be invited to tender; submission of request does not guarantee sele...
No procurement documents available
Deep Portfolio Analysis
Uses:
- Description
- Industries & Services
- Capabilities
- Market & Experience
- Certifications
Overview
Moderate opportunityKey Facts
- Framework procurement
- Supplies contract
- 3 lots
- Supply of NATO calibre Small Arms ammunition and Auto Canon ammunition
- 19 lots covering various calibres (5.56mm, 7.62mm, 9mm, 12.7mm, 30mm) and types (Ball, Tracer, Armour Piercing, High Explosive Incendiary, etc.)
Show full summary
This is a two-stage negotiated procedure (neg-w-call) for framework contracts for small arms and auto cannon ammunition, issued by the European Defence Agency, with performance in Belgium. The procurement is structured into 19 lots covering various NATO calibres (5.56mm, 7.62mm, 9mm, 12.7mm, 30mm) and types (Ball, Tracer, Armour Piercing, High Explosive Incendiary, etc.) in linked or unlinked formats. Interested operators must submit a request to participate by 17 June 2026, and only selected candidates will be invited to submit tenders. Each lot has a specific minimum average annual turnover requirement. The estimated contract value is not provided.
Risks
The absence of an estimated contract value prevents assessment of the financial scale of the opportunity.
Only candidates selected after the first stage will be invited to tender; submission of request does not guarantee sele...
No procurement documents available
Analysis may be incomplete
Only part of the procurement documentation was analyzed. Additional eligibility requirements, certificates, or submission documents may exist in the remaining tender documentation.
Key Requirements
Technical
- Participation open to legal entities registered in EU/EEA
- Not subject to EU restrictive measures (asset freeze, prohibition to make available funds)
- Legal and regulatory capacity to produce and supply the goods in accordance with applicable national and EU legislation
Requirements may be incomplete.
Buyer
Lots (19)
LOT-0002
Lot 1: 5.56mm x 45 NATO Ball
Supply of 5.56mm x 45 NATO Ball ammunition.
Location
Category
Deadline
Award details
Show original TED data
Original TED description
5.56mm x 45 NATO Ball
LOT-0003
Lot 2: 5.56mm x 45 Tracer
Supply of 5.56mm x 45 Tracer ammunition.
Location
Category
Deadline
LOT-0004
Lot 3: 5.56mm x 45 Armour Piercing
Supply of 5.56mm x 45 Armour Piercing ammunition.
Location
Category
Deadline
LOT-0005
LOT-0005
Supply of NATO calibre Small Arms ammunition and Auto Canon ammunition, structured in 19 lots covering various NATO calibres (5.56mm×45; 7.62mm×51; 9mm×19; 12.7mm×99; and 30mm x 173) and types (inter alia Ball; Tracer; Armour Piercing; High Explosive Incendiary etc.). Each lot covers a specific calibre and type in either linked or unlinked formats, as specified hereunder. Additional Information: This procurement procedure is conducted in two stages. In the first stage, economic operators interested in the framework contract(s) are invited to submit a request to participate, drafted in one of the official languages of the European Union. In the second stage, only candidates selected following the evaluation of the requests to participate will be invited to submit a tender. Any tender submitted by a natural or legal person that has not been invited to tender will be rejected. Economic operators that possess the requisite financial capacity to perform the framework contract(s) in accordance with the applicable EU and/or national legislation, and as further specified under the Tendering Terms of the relevant Lot, may request to be invited to tender by submitting a request to participate in accordance with the following cumulative requirements: The request to participate template must be requested by email from EDA Procurement at JP@eda.europa.eu. The request shall clearly state in the subject the Internal identifier: CPoA B PRJ.CAP.1269 2026. The duly completed and signed request to participate must be submitted by email to EDA Procurement at JP@eda.europa.eu no later than 17 June 2026 at 15:00 (Brussels time). The request must be accompanied by a duly completed and signed Legal Entity Form (available at: https://commission.europa.eu/publications/business-partners-legal-entities-and-bank-accounts_en). The submission of a request to participate does not constitute a guarantee of selection. All criteria, requirements, and conditions applicable to this procurement procedure will be set out in the procurement documents made available to invited candidates as part of the invitation to tender. The Contracting Authority reserves the right to cancel the procedure at any time prior to the signature of the contract, without any obligation to compensate the candidates or tenderers.
Location
Category
LOT-0006
LOT-0006
Supply of NATO calibre Small Arms ammunition and Auto Canon ammunition, structured in 19 lots covering various NATO calibres (5.56mm×45; 7.62mm×51; 9mm×19; 12.7mm×99; and 30mm x 173) and types (inter alia Ball; Tracer; Armour Piercing; High Explosive Incendiary etc.). Each lot covers a specific calibre and type in either linked or unlinked formats, as specified hereunder. Additional Information: This procurement procedure is conducted in two stages. In the first stage, economic operators interested in the framework contract(s) are invited to submit a request to participate, drafted in one of the official languages of the European Union. In the second stage, only candidates selected following the evaluation of the requests to participate will be invited to submit a tender. Any tender submitted by a natural or legal person that has not been invited to tender will be rejected. Economic operators that possess the requisite financial capacity to perform the framework contract(s) in accordance with the applicable EU and/or national legislation, and as further specified under the Tendering Terms of the relevant Lot, may request to be invited to tender by submitting a request to participate in accordance with the following cumulative requirements: The request to participate template must be requested by email from EDA Procurement at JP@eda.europa.eu. The request shall clearly state in the subject the Internal identifier: CPoA B PRJ.CAP.1269 2026. The duly completed and signed request to participate must be submitted by email to EDA Procurement at JP@eda.europa.eu no later than 17 June 2026 at 15:00 (Brussels time). The request must be accompanied by a duly completed and signed Legal Entity Form (available at: https://commission.europa.eu/publications/business-partners-legal-entities-and-bank-accounts_en). The submission of a request to participate does not constitute a guarantee of selection. All criteria, requirements, and conditions applicable to this procurement procedure will be set out in the procurement documents made available to invited candidates as part of the invitation to tender. The Contracting Authority reserves the right to cancel the procedure at any time prior to the signature of the contract, without any obligation to compensate the candidates or tenderers.
Location
Category
LOT-0007
LOT-0007
Supply of NATO calibre Small Arms ammunition and Auto Canon ammunition, structured in 19 lots covering various NATO calibres (5.56mm×45; 7.62mm×51; 9mm×19; 12.7mm×99; and 30mm x 173) and types (inter alia Ball; Tracer; Armour Piercing; High Explosive Incendiary etc.). Each lot covers a specific calibre and type in either linked or unlinked formats, as specified hereunder. Additional Information: This procurement procedure is conducted in two stages. In the first stage, economic operators interested in the framework contract(s) are invited to submit a request to participate, drafted in one of the official languages of the European Union. In the second stage, only candidates selected following the evaluation of the requests to participate will be invited to submit a tender. Any tender submitted by a natural or legal person that has not been invited to tender will be rejected. Economic operators that possess the requisite financial capacity to perform the framework contract(s) in accordance with the applicable EU and/or national legislation, and as further specified under the Tendering Terms of the relevant Lot, may request to be invited to tender by submitting a request to participate in accordance with the following cumulative requirements: The request to participate template must be requested by email from EDA Procurement at JP@eda.europa.eu. The request shall clearly state in the subject the Internal identifier: CPoA B PRJ.CAP.1269 2026. The duly completed and signed request to participate must be submitted by email to EDA Procurement at JP@eda.europa.eu no later than 17 June 2026 at 15:00 (Brussels time). The request must be accompanied by a duly completed and signed Legal Entity Form (available at: https://commission.europa.eu/publications/business-partners-legal-entities-and-bank-accounts_en). The submission of a request to participate does not constitute a guarantee of selection. All criteria, requirements, and conditions applicable to this procurement procedure will be set out in the procurement documents made available to invited candidates as part of the invitation to tender. The Contracting Authority reserves the right to cancel the procedure at any time prior to the signature of the contract, without any obligation to compensate the candidates or tenderers.
Location
Category
LOT-0008
LOT-0008
Supply of NATO calibre Small Arms ammunition and Auto Canon ammunition, structured in 19 lots covering various NATO calibres (5.56mm×45; 7.62mm×51; 9mm×19; 12.7mm×99; and 30mm x 173) and types (inter alia Ball; Tracer; Armour Piercing; High Explosive Incendiary etc.). Each lot covers a specific calibre and type in either linked or unlinked formats, as specified hereunder. Additional Information: This procurement procedure is conducted in two stages. In the first stage, economic operators interested in the framework contract(s) are invited to submit a request to participate, drafted in one of the official languages of the European Union. In the second stage, only candidates selected following the evaluation of the requests to participate will be invited to submit a tender. Any tender submitted by a natural or legal person that has not been invited to tender will be rejected. Economic operators that possess the requisite financial capacity to perform the framework contract(s) in accordance with the applicable EU and/or national legislation, and as further specified under the Tendering Terms of the relevant Lot, may request to be invited to tender by submitting a request to participate in accordance with the following cumulative requirements: The request to participate template must be requested by email from EDA Procurement at JP@eda.europa.eu. The request shall clearly state in the subject the Internal identifier: CPoA B PRJ.CAP.1269 2026. The duly completed and signed request to participate must be submitted by email to EDA Procurement at JP@eda.europa.eu no later than 17 June 2026 at 15:00 (Brussels time). The request must be accompanied by a duly completed and signed Legal Entity Form (available at: https://commission.europa.eu/publications/business-partners-legal-entities-and-bank-accounts_en). The submission of a request to participate does not constitute a guarantee of selection. All criteria, requirements, and conditions applicable to this procurement procedure will be set out in the procurement documents made available to invited candidates as part of the invitation to tender. The Contracting Authority reserves the right to cancel the procedure at any time prior to the signature of the contract, without any obligation to compensate the candidates or tenderers.
Location
Category
LOT-0009
LOT-0009
Supply of NATO calibre Small Arms ammunition and Auto Canon ammunition, structured in 19 lots covering various NATO calibres (5.56mm×45; 7.62mm×51; 9mm×19; 12.7mm×99; and 30mm x 173) and types (inter alia Ball; Tracer; Armour Piercing; High Explosive Incendiary etc.). Each lot covers a specific calibre and type in either linked or unlinked formats, as specified hereunder. Additional Information: This procurement procedure is conducted in two stages. In the first stage, economic operators interested in the framework contract(s) are invited to submit a request to participate, drafted in one of the official languages of the European Union. In the second stage, only candidates selected following the evaluation of the requests to participate will be invited to submit a tender. Any tender submitted by a natural or legal person that has not been invited to tender will be rejected. Economic operators that possess the requisite financial capacity to perform the framework contract(s) in accordance with the applicable EU and/or national legislation, and as further specified under the Tendering Terms of the relevant Lot, may request to be invited to tender by submitting a request to participate in accordance with the following cumulative requirements: The request to participate template must be requested by email from EDA Procurement at JP@eda.europa.eu. The request shall clearly state in the subject the Internal identifier: CPoA B PRJ.CAP.1269 2026. The duly completed and signed request to participate must be submitted by email to EDA Procurement at JP@eda.europa.eu no later than 17 June 2026 at 15:00 (Brussels time). The request must be accompanied by a duly completed and signed Legal Entity Form (available at: https://commission.europa.eu/publications/business-partners-legal-entities-and-bank-accounts_en). The submission of a request to participate does not constitute a guarantee of selection. All criteria, requirements, and conditions applicable to this procurement procedure will be set out in the procurement documents made available to invited candidates as part of the invitation to tender. The Contracting Authority reserves the right to cancel the procedure at any time prior to the signature of the contract, without any obligation to compensate the candidates or tenderers.
Location
Category
LOT-0010
LOT-0010
Supply of NATO calibre Small Arms ammunition and Auto Canon ammunition, structured in 19 lots covering various NATO calibres (5.56mm×45; 7.62mm×51; 9mm×19; 12.7mm×99; and 30mm x 173) and types (inter alia Ball; Tracer; Armour Piercing; High Explosive Incendiary etc.). Each lot covers a specific calibre and type in either linked or unlinked formats, as specified hereunder. Additional Information: This procurement procedure is conducted in two stages. In the first stage, economic operators interested in the framework contract(s) are invited to submit a request to participate, drafted in one of the official languages of the European Union. In the second stage, only candidates selected following the evaluation of the requests to participate will be invited to submit a tender. Any tender submitted by a natural or legal person that has not been invited to tender will be rejected. Economic operators that possess the requisite financial capacity to perform the framework contract(s) in accordance with the applicable EU and/or national legislation, and as further specified under the Tendering Terms of the relevant Lot, may request to be invited to tender by submitting a request to participate in accordance with the following cumulative requirements: The request to participate template must be requested by email from EDA Procurement at JP@eda.europa.eu. The request shall clearly state in the subject the Internal identifier: CPoA B PRJ.CAP.1269 2026. The duly completed and signed request to participate must be submitted by email to EDA Procurement at JP@eda.europa.eu no later than 17 June 2026 at 15:00 (Brussels time). The request must be accompanied by a duly completed and signed Legal Entity Form (available at: https://commission.europa.eu/publications/business-partners-legal-entities-and-bank-accounts_en). The submission of a request to participate does not constitute a guarantee of selection. All criteria, requirements, and conditions applicable to this procurement procedure will be set out in the procurement documents made available to invited candidates as part of the invitation to tender. The Contracting Authority reserves the right to cancel the procedure at any time prior to the signature of the contract, without any obligation to compensate the candidates or tenderers.
Location
Category
LOT-0011
LOT-0011
Supply of NATO calibre Small Arms ammunition and Auto Canon ammunition, structured in 19 lots covering various NATO calibres (5.56mm×45; 7.62mm×51; 9mm×19; 12.7mm×99; and 30mm x 173) and types (inter alia Ball; Tracer; Armour Piercing; High Explosive Incendiary etc.). Each lot covers a specific calibre and type in either linked or unlinked formats, as specified hereunder. Additional Information: This procurement procedure is conducted in two stages. In the first stage, economic operators interested in the framework contract(s) are invited to submit a request to participate, drafted in one of the official languages of the European Union. In the second stage, only candidates selected following the evaluation of the requests to participate will be invited to submit a tender. Any tender submitted by a natural or legal person that has not been invited to tender will be rejected. Economic operators that possess the requisite financial capacity to perform the framework contract(s) in accordance with the applicable EU and/or national legislation, and as further specified under the Tendering Terms of the relevant Lot, may request to be invited to tender by submitting a request to participate in accordance with the following cumulative requirements: The request to participate template must be requested by email from EDA Procurement at JP@eda.europa.eu. The request shall clearly state in the subject the Internal identifier: CPoA B PRJ.CAP.1269 2026. The duly completed and signed request to participate must be submitted by email to EDA Procurement at JP@eda.europa.eu no later than 17 June 2026 at 15:00 (Brussels time). The request must be accompanied by a duly completed and signed Legal Entity Form (available at: https://commission.europa.eu/publications/business-partners-legal-entities-and-bank-accounts_en). The submission of a request to participate does not constitute a guarantee of selection. All criteria, requirements, and conditions applicable to this procurement procedure will be set out in the procurement documents made available to invited candidates as part of the invitation to tender. The Contracting Authority reserves the right to cancel the procedure at any time prior to the signature of the contract, without any obligation to compensate the candidates or tenderers.
Location
Category
LOT-0012
LOT-0012
Supply of NATO calibre Small Arms ammunition and Auto Canon ammunition, structured in 19 lots covering various NATO calibres (5.56mm×45; 7.62mm×51; 9mm×19; 12.7mm×99; and 30mm x 173) and types (inter alia Ball; Tracer; Armour Piercing; High Explosive Incendiary etc.). Each lot covers a specific calibre and type in either linked or unlinked formats, as specified hereunder. Additional Information: This procurement procedure is conducted in two stages. In the first stage, economic operators interested in the framework contract(s) are invited to submit a request to participate, drafted in one of the official languages of the European Union. In the second stage, only candidates selected following the evaluation of the requests to participate will be invited to submit a tender. Any tender submitted by a natural or legal person that has not been invited to tender will be rejected. Economic operators that possess the requisite financial capacity to perform the framework contract(s) in accordance with the applicable EU and/or national legislation, and as further specified under the Tendering Terms of the relevant Lot, may request to be invited to tender by submitting a request to participate in accordance with the following cumulative requirements: The request to participate template must be requested by email from EDA Procurement at JP@eda.europa.eu. The request shall clearly state in the subject the Internal identifier: CPoA B PRJ.CAP.1269 2026. The duly completed and signed request to participate must be submitted by email to EDA Procurement at JP@eda.europa.eu no later than 17 June 2026 at 15:00 (Brussels time). The request must be accompanied by a duly completed and signed Legal Entity Form (available at: https://commission.europa.eu/publications/business-partners-legal-entities-and-bank-accounts_en). The submission of a request to participate does not constitute a guarantee of selection. All criteria, requirements, and conditions applicable to this procurement procedure will be set out in the procurement documents made available to invited candidates as part of the invitation to tender. The Contracting Authority reserves the right to cancel the procedure at any time prior to the signature of the contract, without any obligation to compensate the candidates or tenderers.
Location
Category
LOT-0013
LOT-0013
Supply of NATO calibre Small Arms ammunition and Auto Canon ammunition, structured in 19 lots covering various NATO calibres (5.56mm×45; 7.62mm×51; 9mm×19; 12.7mm×99; and 30mm x 173) and types (inter alia Ball; Tracer; Armour Piercing; High Explosive Incendiary etc.). Each lot covers a specific calibre and type in either linked or unlinked formats, as specified hereunder. Additional Information: This procurement procedure is conducted in two stages. In the first stage, economic operators interested in the framework contract(s) are invited to submit a request to participate, drafted in one of the official languages of the European Union. In the second stage, only candidates selected following the evaluation of the requests to participate will be invited to submit a tender. Any tender submitted by a natural or legal person that has not been invited to tender will be rejected. Economic operators that possess the requisite financial capacity to perform the framework contract(s) in accordance with the applicable EU and/or national legislation, and as further specified under the Tendering Terms of the relevant Lot, may request to be invited to tender by submitting a request to participate in accordance with the following cumulative requirements: The request to participate template must be requested by email from EDA Procurement at JP@eda.europa.eu. The request shall clearly state in the subject the Internal identifier: CPoA B PRJ.CAP.1269 2026. The duly completed and signed request to participate must be submitted by email to EDA Procurement at JP@eda.europa.eu no later than 17 June 2026 at 15:00 (Brussels time). The request must be accompanied by a duly completed and signed Legal Entity Form (available at: https://commission.europa.eu/publications/business-partners-legal-entities-and-bank-accounts_en). The submission of a request to participate does not constitute a guarantee of selection. All criteria, requirements, and conditions applicable to this procurement procedure will be set out in the procurement documents made available to invited candidates as part of the invitation to tender. The Contracting Authority reserves the right to cancel the procedure at any time prior to the signature of the contract, without any obligation to compensate the candidates or tenderers.
Location
Category
LOT-0014
LOT-0014
Supply of NATO calibre Small Arms ammunition and Auto Canon ammunition, structured in 19 lots covering various NATO calibres (5.56mm×45; 7.62mm×51; 9mm×19; 12.7mm×99; and 30mm x 173) and types (inter alia Ball; Tracer; Armour Piercing; High Explosive Incendiary etc.). Each lot covers a specific calibre and type in either linked or unlinked formats, as specified hereunder. Additional Information: This procurement procedure is conducted in two stages. In the first stage, economic operators interested in the framework contract(s) are invited to submit a request to participate, drafted in one of the official languages of the European Union. In the second stage, only candidates selected following the evaluation of the requests to participate will be invited to submit a tender. Any tender submitted by a natural or legal person that has not been invited to tender will be rejected. Economic operators that possess the requisite financial capacity to perform the framework contract(s) in accordance with the applicable EU and/or national legislation, and as further specified under the Tendering Terms of the relevant Lot, may request to be invited to tender by submitting a request to participate in accordance with the following cumulative requirements: The request to participate template must be requested by email from EDA Procurement at JP@eda.europa.eu. The request shall clearly state in the subject the Internal identifier: CPoA B PRJ.CAP.1269 2026. The duly completed and signed request to participate must be submitted by email to EDA Procurement at JP@eda.europa.eu no later than 17 June 2026 at 15:00 (Brussels time). The request must be accompanied by a duly completed and signed Legal Entity Form (available at: https://commission.europa.eu/publications/business-partners-legal-entities-and-bank-accounts_en). The submission of a request to participate does not constitute a guarantee of selection. All criteria, requirements, and conditions applicable to this procurement procedure will be set out in the procurement documents made available to invited candidates as part of the invitation to tender. The Contracting Authority reserves the right to cancel the procedure at any time prior to the signature of the contract, without any obligation to compensate the candidates or tenderers.
Location
Category
LOT-0016
LOT-0016
Supply of NATO calibre Small Arms ammunition and Auto Canon ammunition, structured in 19 lots covering various NATO calibres (5.56mm×45; 7.62mm×51; 9mm×19; 12.7mm×99; and 30mm x 173) and types (inter alia Ball; Tracer; Armour Piercing; High Explosive Incendiary etc.). Each lot covers a specific calibre and type in either linked or unlinked formats, as specified hereunder. Additional Information: This procurement procedure is conducted in two stages. In the first stage, economic operators interested in the framework contract(s) are invited to submit a request to participate, drafted in one of the official languages of the European Union. In the second stage, only candidates selected following the evaluation of the requests to participate will be invited to submit a tender. Any tender submitted by a natural or legal person that has not been invited to tender will be rejected. Economic operators that possess the requisite financial capacity to perform the framework contract(s) in accordance with the applicable EU and/or national legislation, and as further specified under the Tendering Terms of the relevant Lot, may request to be invited to tender by submitting a request to participate in accordance with the following cumulative requirements: The request to participate template must be requested by email from EDA Procurement at JP@eda.europa.eu. The request shall clearly state in the subject the Internal identifier: CPoA B PRJ.CAP.1269 2026. The duly completed and signed request to participate must be submitted by email to EDA Procurement at JP@eda.europa.eu no later than 17 June 2026 at 15:00 (Brussels time). The request must be accompanied by a duly completed and signed Legal Entity Form (available at: https://commission.europa.eu/publications/business-partners-legal-entities-and-bank-accounts_en). The submission of a request to participate does not constitute a guarantee of selection. All criteria, requirements, and conditions applicable to this procurement procedure will be set out in the procurement documents made available to invited candidates as part of the invitation to tender. The Contracting Authority reserves the right to cancel the procedure at any time prior to the signature of the contract, without any obligation to compensate the candidates or tenderers.
Location
Category
LOT-0017
LOT-0017
Supply of NATO calibre Small Arms ammunition and Auto Canon ammunition, structured in 19 lots covering various NATO calibres (5.56mm×45; 7.62mm×51; 9mm×19; 12.7mm×99; and 30mm x 173) and types (inter alia Ball; Tracer; Armour Piercing; High Explosive Incendiary etc.). Each lot covers a specific calibre and type in either linked or unlinked formats, as specified hereunder. Additional Information: This procurement procedure is conducted in two stages. In the first stage, economic operators interested in the framework contract(s) are invited to submit a request to participate, drafted in one of the official languages of the European Union. In the second stage, only candidates selected following the evaluation of the requests to participate will be invited to submit a tender. Any tender submitted by a natural or legal person that has not been invited to tender will be rejected. Economic operators that possess the requisite financial capacity to perform the framework contract(s) in accordance with the applicable EU and/or national legislation, and as further specified under the Tendering Terms of the relevant Lot, may request to be invited to tender by submitting a request to participate in accordance with the following cumulative requirements: The request to participate template must be requested by email from EDA Procurement at JP@eda.europa.eu. The request shall clearly state in the subject the Internal identifier: CPoA B PRJ.CAP.1269 2026. The duly completed and signed request to participate must be submitted by email to EDA Procurement at JP@eda.europa.eu no later than 17 June 2026 at 15:00 (Brussels time). The request must be accompanied by a duly completed and signed Legal Entity Form (available at: https://commission.europa.eu/publications/business-partners-legal-entities-and-bank-accounts_en). The submission of a request to participate does not constitute a guarantee of selection. All criteria, requirements, and conditions applicable to this procurement procedure will be set out in the procurement documents made available to invited candidates as part of the invitation to tender. The Contracting Authority reserves the right to cancel the procedure at any time prior to the signature of the contract, without any obligation to compensate the candidates or tenderers.
Location
Category
LOT-0018
LOT-0018
Supply of NATO calibre Small Arms ammunition and Auto Canon ammunition, structured in 19 lots covering various NATO calibres (5.56mm×45; 7.62mm×51; 9mm×19; 12.7mm×99; and 30mm x 173) and types (inter alia Ball; Tracer; Armour Piercing; High Explosive Incendiary etc.). Each lot covers a specific calibre and type in either linked or unlinked formats, as specified hereunder. Additional Information: This procurement procedure is conducted in two stages. In the first stage, economic operators interested in the framework contract(s) are invited to submit a request to participate, drafted in one of the official languages of the European Union. In the second stage, only candidates selected following the evaluation of the requests to participate will be invited to submit a tender. Any tender submitted by a natural or legal person that has not been invited to tender will be rejected. Economic operators that possess the requisite financial capacity to perform the framework contract(s) in accordance with the applicable EU and/or national legislation, and as further specified under the Tendering Terms of the relevant Lot, may request to be invited to tender by submitting a request to participate in accordance with the following cumulative requirements: The request to participate template must be requested by email from EDA Procurement at JP@eda.europa.eu. The request shall clearly state in the subject the Internal identifier: CPoA B PRJ.CAP.1269 2026. The duly completed and signed request to participate must be submitted by email to EDA Procurement at JP@eda.europa.eu no later than 17 June 2026 at 15:00 (Brussels time). The request must be accompanied by a duly completed and signed Legal Entity Form (available at: https://commission.europa.eu/publications/business-partners-legal-entities-and-bank-accounts_en). The submission of a request to participate does not constitute a guarantee of selection. All criteria, requirements, and conditions applicable to this procurement procedure will be set out in the procurement documents made available to invited candidates as part of the invitation to tender. The Contracting Authority reserves the right to cancel the procedure at any time prior to the signature of the contract, without any obligation to compensate the candidates or tenderers.
Location
Category
LOT-0019
LOT-0019
Supply of NATO calibre Small Arms ammunition and Auto Canon ammunition, structured in 19 lots covering various NATO calibres (5.56mm×45; 7.62mm×51; 9mm×19; 12.7mm×99; and 30mm x 173) and types (inter alia Ball; Tracer; Armour Piercing; High Explosive Incendiary etc.). Each lot covers a specific calibre and type in either linked or unlinked formats, as specified hereunder. Additional Information: This procurement procedure is conducted in two stages. In the first stage, economic operators interested in the framework contract(s) are invited to submit a request to participate, drafted in one of the official languages of the European Union. In the second stage, only candidates selected following the evaluation of the requests to participate will be invited to submit a tender. Any tender submitted by a natural or legal person that has not been invited to tender will be rejected. Economic operators that possess the requisite financial capacity to perform the framework contract(s) in accordance with the applicable EU and/or national legislation, and as further specified under the Tendering Terms of the relevant Lot, may request to be invited to tender by submitting a request to participate in accordance with the following cumulative requirements: The request to participate template must be requested by email from EDA Procurement at JP@eda.europa.eu. The request shall clearly state in the subject the Internal identifier: CPoA B PRJ.CAP.1269 2026. The duly completed and signed request to participate must be submitted by email to EDA Procurement at JP@eda.europa.eu no later than 17 June 2026 at 15:00 (Brussels time). The request must be accompanied by a duly completed and signed Legal Entity Form (available at: https://commission.europa.eu/publications/business-partners-legal-entities-and-bank-accounts_en). The submission of a request to participate does not constitute a guarantee of selection. All criteria, requirements, and conditions applicable to this procurement procedure will be set out in the procurement documents made available to invited candidates as part of the invitation to tender. The Contracting Authority reserves the right to cancel the procedure at any time prior to the signature of the contract, without any obligation to compensate the candidates or tenderers.
Location
Category
LOT-0020
LOT-0020
Supply of NATO calibre Small Arms ammunition and Auto Canon ammunition, structured in 19 lots covering various NATO calibres (5.56mm×45; 7.62mm×51; 9mm×19; 12.7mm×99; and 30mm x 173) and types (inter alia Ball; Tracer; Armour Piercing; High Explosive Incendiary etc.). Each lot covers a specific calibre and type in either linked or unlinked formats, as specified hereunder. Additional Information: This procurement procedure is conducted in two stages. In the first stage, economic operators interested in the framework contract(s) are invited to submit a request to participate, drafted in one of the official languages of the European Union. In the second stage, only candidates selected following the evaluation of the requests to participate will be invited to submit a tender. Any tender submitted by a natural or legal person that has not been invited to tender will be rejected. Economic operators that possess the requisite financial capacity to perform the framework contract(s) in accordance with the applicable EU and/or national legislation, and as further specified under the Tendering Terms of the relevant Lot, may request to be invited to tender by submitting a request to participate in accordance with the following cumulative requirements: The request to participate template must be requested by email from EDA Procurement at JP@eda.europa.eu. The request shall clearly state in the subject the Internal identifier: CPoA B PRJ.CAP.1269 2026. The duly completed and signed request to participate must be submitted by email to EDA Procurement at JP@eda.europa.eu no later than 17 June 2026 at 15:00 (Brussels time). The request must be accompanied by a duly completed and signed Legal Entity Form (available at: https://commission.europa.eu/publications/business-partners-legal-entities-and-bank-accounts_en). The submission of a request to participate does not constitute a guarantee of selection. All criteria, requirements, and conditions applicable to this procurement procedure will be set out in the procurement documents made available to invited candidates as part of the invitation to tender. The Contracting Authority reserves the right to cancel the procedure at any time prior to the signature of the contract, without any obligation to compensate the candidates or tenderers.
Location
Category
LOT-0021
LOT-0021
Supply of NATO calibre Small Arms ammunition and Auto Canon ammunition, structured in 19 lots covering various NATO calibres (5.56mm×45; 7.62mm×51; 9mm×19; 12.7mm×99; and 30mm x 173) and types (inter alia Ball; Tracer; Armour Piercing; High Explosive Incendiary etc.). Each lot covers a specific calibre and type in either linked or unlinked formats, as specified hereunder. Additional Information: This procurement procedure is conducted in two stages. In the first stage, economic operators interested in the framework contract(s) are invited to submit a request to participate, drafted in one of the official languages of the European Union. In the second stage, only candidates selected following the evaluation of the requests to participate will be invited to submit a tender. Any tender submitted by a natural or legal person that has not been invited to tender will be rejected. Economic operators that possess the requisite financial capacity to perform the framework contract(s) in accordance with the applicable EU and/or national legislation, and as further specified under the Tendering Terms of the relevant Lot, may request to be invited to tender by submitting a request to participate in accordance with the following cumulative requirements: The request to participate template must be requested by email from EDA Procurement at JP@eda.europa.eu. The request shall clearly state in the subject the Internal identifier: CPoA B PRJ.CAP.1269 2026. The duly completed and signed request to participate must be submitted by email to EDA Procurement at JP@eda.europa.eu no later than 17 June 2026 at 15:00 (Brussels time). The request must be accompanied by a duly completed and signed Legal Entity Form (available at: https://commission.europa.eu/publications/business-partners-legal-entities-and-bank-accounts_en). The submission of a request to participate does not constitute a guarantee of selection. All criteria, requirements, and conditions applicable to this procurement procedure will be set out in the procurement documents made available to invited candidates as part of the invitation to tender. The Contracting Authority reserves the right to cancel the procedure at any time prior to the signature of the contract, without any obligation to compensate the candidates or tenderers.
Location
Category
Procurement Details
- Publication date
- 10 Jun 2026
- Notice type
- Contract notice — standard
- Languages
- English
Reference metadata
- Notice subtype
- 18
- Notice version
- 1
- Legal basis
- 32009L0081
Reference IDs
- Tender ID
- 400993-2026
- Source notice ID
- 06058073-f4f9-4080-9fb3-7269b0eca92c
Similar tenders
Belgium – Passenger cars – Raamovereenkomst voor de aankoop en levering van elektrische personenwagens tbv de Solidaris ziekenfondsen
Belgium – Transport equipment and auxiliary products to transportation – Leasing opérationnel pour une flotte de véhicules de fonction
Belgium – Imaging equipment for medical, dental and veterinary use – fourniture, l’installation, la mise en service et la maintenance d’un scanner à comptage photonique clinique (CT-SCAN)
Belgium – Fruit, vegetables and related products – Groenten, fruit en salades
Belgium – Petroleum products, fuel, electricity and other sources of energy – Fourniture de gasoil-diesel B7 routier, de gasoil-diesel (application industrielle), de gasoil-diesel (application chauffage), d'essence E10 ou E5 et de recharges électriques
Belgium – Food, beverages, tobacco and related products – Algemene voeding
Opportunity Score
Why this score?
Opportunity
60 / 100
Complexity
80 / 100
Risk factors
The absence of an estimated contract value prevents assessment of the financial scale of the opportunity.
Only candidates selected after the first stage will be invited to tender; submission of request does not guarantee sele...
No procurement documents available
Deep Portfolio Analysis
Uses:
- Description
- Industries & Services
- Capabilities
- Market & Experience
- Certifications